Subscribe

CURRICULUM VITAE of MARCIAL T. OCAMPO

February 26th, 2012 Posted in energy technology expert

CURRICULUM VITAE of MARCIAL T. OCAMPO

Marcial Ocampo is a local and international expert and consultant on Energy & Climate Change. He is also an energy technology selection and business development expert and has prepared many feasibility studies on both conventional (oil, coal, natural gas) and renewable energy (biomass, mini-hydro, solar PV and wind). He has prepared a complete line of project finance models for almost all power generation technologies to calculate its long-run marginal running cost (LRMC) which is also known as the levelized cost of energy (LCOE) as well as first year tariff (also called feed-in-tariff for renewable energy). He also applies linear programming techniques in optimizing the configuration of co-generation and tri-generation systems (power, process heat, space cooling) and power plant dispatch to arrive at optimal power generation mix. He is also an expert in oil price calculations and tariff calculations which could be applied to renewable energy feed-in-tariff, conventional energy and electricity tariff as well as water distribution tariff. 

EDUCATIONAL BACKGROUND:

Elementary     :        DologonLaboratorySchool

Musuan, Bukidnon

1958 – 1964

Valedictorian

High School    :         San SebastianCollege

Claro M. Recto,Manila

1964 – 1968

Salutatorian

College            :          B. S. Chemical Engineering

University of thePhilippines, Diliman,Quezon City

1968 – 1973

2nd Place (87.75%) – Chemical Engineering Board Exam, 1973

Post Graduate  :         M. S. Chemical Engineering

                                   University of thePhilippines, Diliman,Quezon City

Thesis: “The Assimilative Capacity of Some Rivers in the Philippines, an LP Model”

1974 – 1978

                                    M. S. Combustion and Energy

                                   University of Leeds,United Kingdom

Thesis: “The Performance and Emission Characteristics of a Methanol-Fueled Spark Ignition Engine”

1979-1980

 

EMPLOYMENT HISTORY:

 

Optimal Design of 900 kW Mapanuepe Lake Mini-Hydro Power Project for the San Marcelino, Zambales Municipal Government

May 1, 2012 – present (on-going)

 

I have a toolbox for plotting the dam, settling basin, headrace, forebay, surge tank, penstock, power turbine, power house, tailrace, sub-station, transmission line and access road using Google Earth and verified by actual survey by a Geodetic Engineer. I then use my mini-hydro design toolbox to determine the dimensions (depth, width at bottom, width at top, radius, diameter) of each component to deliver the
required water flow given the slope and type of headrace (rectangular concrete, trapezoidal concrete, circular concrete pipe and circular GRP pipe).

 

The dimensions are inputs to my cost estimation toolbox to estimate the base cost and escalated cost when constructed in the future. The all-in capital cost includes the equipment cost, ocean freight and insurance, duties and taxes, local transport, installation cost, civil works, project development costs, working capital, and financing charges (legal and loan arranger fees, commitment fees, interest during
construction). The cost estimate then goes to my project finance model to determine the equity and project returns given the first year tariff (feed-in-tariff), or alternatively, calculate the first year tariff needed to meet the minimum equity and project returns. The model also prepares the income statement, balance sheet, cash flow, and levelized cost breakdown.

 

Solar PV-Diesel Hybrid Power Generation Financial Model

April – May 2012 (completed)

Prepared a solar PV project finance model and Diesel Genset project finance model and integrated the two models into a Solar PV-Diesel Hybrid power plant model for
use by LGUs and DUs wishing to reduce their peaking diesel generation cost. The model determines the equity and project returns given the blended first year tariff, or calculate the blended tariff needed to meet minimum equity and project returns. It also prepares the income statement, balance sheet, cash flow, and levelized cost breakdown.

 

Technical Working Group (TWG) Member, Oil Industry Pricing Review Committee (OPRC), Philippine Department of Energy (DOE)

February 14, 2012 to present

The Philippine Secretary of Energy created an independent review committee to determine whether domestic price of petroleum products (LPG, gasoline, diesel, kerosene, aviation turbine fuel, fuel oil, etc.) are reasonable and that the oil companies are not overly profiteering at the expense of the end consumers.

 

External Evaluation of ESMAP 2007-2011

January 6-19, 2011 completed (Manila,Philippines)

The Baastel Consulting Group has been contracted by the World Bank to carry out an independent review of the outcomes and achievements of ESMAP for the last five years.  ESMAP (Energy Sector Management Assistance Program) is a global knowledge and technical assistance partnership administered by the World Bank. ESMAP’s primary mission is to assist low and middle-income countries to increase know-how and institutional capacity to achieve environmentally sustainable energy solutions for poverty reduction and economic growth.

 

International Energy Consultant for Final Review of Demonstration for Fuel-Cell Bus Commercialization in China (Phase II)

December 5-26, 2011 completed (BeijingandShanghai,China)

This report will document the Final-Term Review (FTR) of the project following the monitoring and evaluation system of UNDP/GEF to promote accountability for the achievement of GEF objectives through assessment of results of activities and partnership ushered by the project and to serve as feedback mechanism as basis for decision making to improve knowledge and performance.

 

International Climate Change Expert for the conduct of mid-term review of a project of UNDP-China on “Enabling China to Prepare Its Second National Communication (SNC) to the UNFCCC

Sep 12-Oct 7, 2011 (completed)

This 4-year project has now on its mid-point, thus requires a mid-term review to asses its performance relative to its stated goals, objectives and activities. The objective of the project is to develop a more comprehensive national Greenhouse Gas (GHG) inventory, with a report of extended categories and sources of GHG emissions and applying the IPCC guidelines to reduce uncertainties in the inventory, establish a preliminary inventory database management system with a view of administering the inventory data in a more scientific way and making the preparation of GHG inventories a continuing process. It will develop an approach for projecting GHG emissions inChina, strengthen the assessment of the impacts and vulnerability to climate change and disseminate relevant policies on mitigation and adaptation to climate change. It will further enhance public awareness on climate change, leading to the submission of the SNC to the Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (UNFCC). The international expert, together with a national expert as a mid-term review (MTR) team, will conduct the mid-term review.

 

Project Finance Modeling Consultant for Tri-Generation (Power, Heat and Space Cooling) for Data Center Park for the Government of Singapore

Sep 1-Oct 28, 2011 (Phase 1 completed)

Hitachi Singapore is preparing the design of a combined cycle power plant using natural gas to produce Tier 4 (highly redundant) electricity on-site with the national grid as backup power for a data center that will house the computer servers of the major banks of the world as well as call center and bank room office of major corporations. The waste heat from the gas turbine together with auxiliary furnace will produce steam in a boiler to further generate electricity and the spent heat together with some bleed steam will go to absorption chillers to augment electricity-driven centrifugal chillers to provide chilled water which will be piped to cool the buildings housing the data center. The consultancy service will audit the existing financial model ofHitachiand enhance it further with advanced power plant modeling techniques and project financial modeling skills.

 

Wind Energy Resource Assessment and Feasibility Study for Two Wind Sites of Philcarbon, Inc.

August 1 – August 30, 2011 (completed)

PhilCarbon, Inc. (PhilCarbon) has engaged Marcial Ocampo (Consultant) to undertake a wind energy resource assessment and pre-feasibility study for a proposed wind site in Bulalacao, Oriental Mindoro. In addition, the Consultant was requested to evaluate the wind energy resource potential of another proposed site in Sagada,MountainProvincewhich has an anemometer station operated by NPC from 1995-1997.

 

Technology & Regulatory Consultant for two Solar PV Power Plants in the province of Bataan for SUNCONNEX

Jul – Dec 2011 (completed)

There is a need to mitigate climate change via GHG emission reduction thru carbon emission reduction in the power generation sector. With the passage of the New Renewable Energy Law and its IRR, the DOE, NREB and ERC are now in the process of developing the feed-in tariff system in thePhilippines. It is in this light that SunConnex is interested in expanding its role in providing solar PV power plant in thePhilippines.

 

Individual Advisor on the Pre-Feasibility Study for a Coal-fired Power Plant in Zamboanga Sibugay Province, Island of Mindanao

May 16-July 26, 2011 (completed)

PNOC EC intends to develop agreenfieldcoal-fired power plant in theprovinceofZamboanga SibugayinMindanaoand would like to engage the services of a CONSULTANT to conduct the related technical and financial feasibility study. The CONSULTANT shall, among others, identify potential customers, recommend the best location and optimum capacity, and determine the technical and commercial viability of the proposed power plant.

 

International Renewable Energy Expert for REMOVAL OF BARRIERS TO

BIOMASS POWER GENERATION IN INDIA, PHASE I

April 3-May 31, 2011 (completed)

The objective of this two-phase project is to remove barriers to the increased use of biomass energy sources for generating electricity for own consumption and export to the grid.  This project aims to accelerate the adoption of environmentally sustainable biomass power and cogeneration technologies inIndia.  It will promote combustion, gasification and cogeneration technologies for electricity generation using different types of captive and distributed biomass resources. The project will focus on biomass power projects to be undertaken in three different specific contexts: cooperative sugar mills; agro-processors and biomass producers; and distributed or decentralized biomass. As international expert, the Consultant will conduct a mid-term review of the phase I project, The mid-term evaluation will assess the relevance, performance and success of the project. It looks at early signs of potential impact and sustainability of results, including the contribution to capacity development and the achievement of global environmental goals. It will also identify/document lessons learned and provide recommendations that might improve design and implementation of UNDP/GEF projects.

 

Consultant for Philippine LNG and Gas Market Study

March 7-April 15, 2011 (completed)

The Consultant shall prepare a comprehensive report on the local market potential for gas in thePhilippinesin the next ten years.  This will require, among others, a research on the following: Historical and forecasted gas consumptions in power, transportation, industrial, commercial and residential sectors in the regions of Luzon, Visayas and Mindanao; Available supply gas in the three regions and the potential for future sources of supply from the local and international market; Historical and future trends in gas the prices in the local and international market. For the local market, focus on the gas pricing scheme of Malampaya natural gas while for the international market, the price trends in the Asia-Australia regions. Identify relevant energy policies and legislations encouraging the use of natural gas as an alternative fuel for oil and coal.

 

Technical and Economic Feasibility Consultant for Wind of Constellation Energy Jan. 31-Mar. 16, 2011 (completed)

This includes wind energy resource assessment (wind speed, direction, power output vs time of year), capital and O&M cost estimate and project finance modeling to determine first year tariff and economic returns of 5 wind sites in Negros Oriental.

 

Demonstration for Fuel-Cell Bus Commercialization in China (Phase II)

Nov 8 – 24, 2010 (BeijingandShanghai,China) – finalized mid-term review report

This report documents the Mid-Term Review (MTR) of the project following the monitoring and evaluation system of UNDP/GEF to promote accountability for the achievement of GEF objectives through assessment of results of activities and partnership ushered by the project and to serve as feedback mechanism as basis for decision making to improve knowledge and performance. The MTR Team is composed of independent consultants Mr. Marcial T. Ocampo (International Consultant and Team Head) and Prof. Tian Guangyu, Ph.D. (National Consultant and Team Member).

 

Wind-Diesel Hybrid Power Generation (WHyPGen) Marketing Development Initiatives

August 23-September 29, 2010 (Jakarta,Indonesia) – finalized project document and CEO endorsement

International Technical Consultant (ITC) – Renewable Energy Project Development Expert, who will lead a Project Development Team of over 5 Indonesian National Technical Consultants (NTCs) that is tasked to design and develop GEF Renewable Energy Project specifically on Wind-Diesel Hybrid Power Generation (WHyPGen). The output is the final version of the Project Document (ProDoc) and the CEO Endorsement Request (CER).  A total of 17 wind sites and 12 wind turbine manufacturers/models were analyzed to arrive at the annual power generation and capacity factors of the wind turbines.  The diesel generation is likewise calculated by difference from demand of the nearby grid (on-grid and off-grid remote areas) leading to annual power generation and capacity factor of the peaking and baseload diesel units.  The wind turbine is expected to displace 15% of the peak demand of the grid. The peaking and baseload diesel units will carry the remaining 85% of the peak demand of the grid, and shall be loaded not more than 50% and 75% for the peaking and baseload diesel units, respectively.  The total capacities and capacity factors are then fed to the project finance models to determine the all-in project cost and starting electricity tariff (feed-in tariff for wind, tariff for diesel).  The wind turbine model that provides the lowest wind tariff is the optimal model for the wind site. Finally, the GHG emission reduction arising from the wind turbine is calculated for the nearby grid and the national grid to determine its climate change impact.

 

Organizing the proposed conference on “Energy & Climate Change : A Complete Review of Power Generation Technologies and Impact on Climate Change”

Tentative September 2010 (deferred)

As a follow-up to the Asean Clean Energy Forum held recently at the Asian Development Bank last 21-25 June 2010, and in view of the need to provide stakeholders’ input into the development of a new energy strategy of the incoming administration of President Aquino towards sustainable development, a proposed conference on “Energy & Climate Change” is being planned and coordinated with the ADB, government, end-consumers and power generators, utilities, energy efficiency and demand management practitioners, smart grid and distributed generation provides, and renewable energy developers. The objective is to provide adequate, predictable and secure power supplies, mitigate risks, provide transparency in price setting, protect energy tax revenues, ensure affordable and cheaper power costs, reduce GHG emission and address climate change issues.

 

Consultancy Services for 150 mw Kanan Hydro Power Project (SK Engineering & Construction Corporation)

June 22-August 22, 2010 – completed

Secure an off-taker for the Kanan Hydro plant (obtained MOU from MERALCO) and provide data on the Luzon Grid electricity supply and demand situation (historical and forecast) and price of electricity in the grid (average NPC grid, WESM rates). The Kanan Hydro plant is located near Infant and Gen. Nakar, Quezon, and drains into thePacific Ocean.

 

Purchase of a Distribution Utility (Ibaan Electric Corporation) by E-Power Corporation

June 1-21, 2010 – completed

Analyzed the Annual Report & Performance 2008-2009 and the Audited Financial Report 2008-2009 in order to prepare projected customer count, kW demand, kWh energy consumption, electricity tariff, revenues, power costs, and administrative expenses.  This provided inputs for the projected income statement, balance sheet and net cash flow.  By comparing project cost (purchase price) with net cash flow, the project IRR, NPV and payback were calculated.  Likewise, comparing the equity portion of the project cost (30% equity at 15% p.a. return, 70% debt at 10% p.a. interest) with the net cash flow, the equity IRR, NPV and payback were calculated to guide the investor/purchaser of the utility.

 

Feed-in Tariff for Waste-to-Power Project for San Pedro Thermal Conversion Inc.

May 23-June 16, 2010 – completed

Prepared the all-in capital cost estimate (land, equipment, installation, project development, working capital, interest cost during construction) and project finance model for determining the first year tariff (feed-in tariff) of this renewable energy (RE) project for consideration by the DOE, NREB and ERC.  The feed-in tariff is the cost per kWh paid to RE developers by the TRANSCO for delivering RE power to the grid.  The TRANSCO collects the RE charge from all customers and pays the RE generators.

 

New Energy Plan and Climate Change Program for the Incoming President-Elect Noynoy Aquino.

May 24, 2010-28 June, 2010 – pro bono

Together with former USEC Mariano Salazar and Hon. Sec. Heherson Alvarez, prepared a framework for implementing a review of the country’s energy plan to address energy supply security, pricing and climate change potential issues.

 

Consultancy Services on the Pre-Feasibility Study for a Coal-fired Power Plant in Surigao, Island of Mindanao

April 16-June 16, 2010 – completed

To assist Benguet Mining Corporation in developing a financial model for and to provide certain consulting services in the preparation of a Feasibility Study for a 70-140 mw mine-mouth coal-fired circulating fluidized  bed (CFB) power plant in the island of Mindanao.

 

Consultancy Services for Aboitiz Power Corporation

March 16-April 16, 2010 – completed

To assist Aboitiz in developing a financial model for and to provide certain consulting services in support of its proposed bid for appointment as Administrator of the Energy Conversion Agreement between the National Power Corporation and KEPCO Ilijan Corporation for the 1,200-MW Ilijan combined-cycle gas-turbine power (CCGT) plant.

 

Study on the economic and financial status of biofuels in the Philippines

Feb 1 – May 30, 2010 – completed

A study for the Institute of Energy Economics, Japan, (IEEJ) for the preparation of biodiesel (copra to biodiesel CME, coconut oil to CME, jatropha to CME, sugarcane to bioethanol).

 

Waste-to-Energy Project (Municipal Solid Waste or MSW to Diesel)

For local government units inCentral Luzon(Bulacan, Pampanga, Tarlac, Nueva Ecija and possibly Metro Manila) – deferred

Prepared proposal for MSW to Diesel project to assist the LGUs comply with the Solid Waste Management Act to operate Material Recovery Facilities and Sanitary Landfill for final disposal of municipal solid wastes and garbage and at the same time producing biomass-derived diesel fuel.  Ongoing negotiation with Consultant Ed San Juan.

 

Feed-in Tariff Project Finance Model for DOE and NREB

January 20-21, 2010 during the TWG Consultative Meeting of the National Renewable Energy Board and Department of Energy atSubic

Prepared feed-in tariff (FiT) calculation procedure (project finance model) for Renewable Energy (RE) power generation technologies (biomass direct combustion, biomass cogeneration, run-of-river mini-hydro, wind, solar) for use by DOE  and NREB (January 20-21, 2010 TWG Consultative Meeting held at Subic International Hotel) in recommending to the ERC the FiT needed to encourage RE investments and determine the level of  Renewable Energy Charge (REC in PhP/kWh) to be collected from end-users for payment to RE generators.  Ongoing work with German Consultant and NREB Consultant Atty. Pete Maniego.

 

Impact of the New Renewable Energy Law and its IRR on Electricity Price (Feed-In Tariff Calculation Model)

December 2, 2009 during Energy Technology Conference & Exhibits at the New World Hotel,Makati.

Presented a summary of the new RE law and its IRR, including a list of incentives, for project developers, suppliers and users of RE technologies during Energy Conference.  A project finance model for calculating Feed-In Tariff (FIT) was also prepared and demonstrated to the various energy practitioners.

 

Congressional Ad Hoc Committee on Dams Management & Safety

November 11, 2009  – Dam Simulation Model for San Roque Dam (pro bono)

On-going congressional review of Dam Release Protocol in view of the massive damage of around P40 billion brought about by spillway release by San Roque Dam at the height of Typhoon “Pepeng”.  Prepared a spreadsheet dam simulation model to predict dam height given the beginning dam height and water volume, inflows (from rainfall and Binga outflows) and outflows (power generation water and spill water) and using the model to estimate the lead time and quantity of pre-emptive discharge needed to attenuate and minimize spillway releases during typhoons and extreme rainfalls.

 

FEASIBILITY STUDY OF A GREENFIELD NATURAL GAS-FIRED POWER PLANT

July 27 to October 9, 2009 – Feasibility study for a 250-500 MW natural gas-fired CCGT

On-going feasibility study (market, technical, economic and financial) to optimize capacity of natural gas-fired combined cycle gas turbine (CCGT) power plant and determine its plant location (Batangas, Laguna,Cavite).  Finalized financial model, power pt presentation and Feasibility Study Final Report.

 

POWER PLANT DESIGN AND COSTS CONSULTANCY FOR PNOC EXPLORATION CORPORATION’s COC 122 COAL PROJECT

June 1 to July 15, 2009 – Feasibility study for a 30, 50 or 100 MW lignite coal-fired atmospheric circulating fluidized bed (CFB) power plant in Cauayan, Isabela.

Competed feasibility study (market, technical, economic and financial) to optimize capacity of a mine-mouth lignite coal-fired CFB power plant and determine its plant location (near river or near mine) using the 28 million tons of coal reserves found in Cauayan, Isabela.

 

RAPCO Coconut Oil Mill and CME Biodiesel Plant Expansion Study

Oct 2008 – Feasibility Study and Project Finance Model for Coconut Oil mill and CME Biodesel Plant expansion of RAPCO,  an integrated CNO plant (25 MT/day) and CME plant (2.5 kL/day expanding to 10.0 kL/day) inSan PabloCity.

Feasibility study (market, technical, economic and financial) for the production of coconut oil (CNO) form copra and production of CME for transport use as biodiesel fuel additive.  RAPCO has recently obtained a DOE certification as a biofuel additive for use by oil companies and individuals for blending into B1 (1%) and B2 (2%) biodiesels. Three (3) models for an integrated plant (CNO & CME), separate CNO Plant, and separate CME plant were prepared to advice the owner on best equity structure in order to maximize returns, minimize expansion costs and improve overall efficiency.  It is evaluating proposals from prospective investors who desire majority ownership of the DOE-accredited CME biodiesel plant.

 

Optimal Use of Surplus, New Reserves and Bank Malampaya Gas Preliminary Study

September 2008 tentative – A preliminary study to be funded by USAID for the DOE Natural Gas Office (awaiting USAID contract)

A proposed  study to determine which Delivery Option (brand new gas pipeline, converted black oil pipeline to gas service, CNG/LNG via lorries, CNG/LNG by sea) is best/timely mode in delivering natural gas for both power and non-power use (residential, commercial & building, industrial, agricultural, power)  to ensure maximum benefits to the country, provide cheaper electricity, promote cleaner environment and ensure logical development of natural gas industry through diversified supply from domestic gas, imported LNG and Trans-ASEAN gas pipeline.

 

Coconut Methyl Ester (CME) from Copra as Bio-Diesel Substitute

May 30-August 5, 2008  – Preliminary Feasibility Study and Project Finance Model for CME Manufacture from Copra – completed study and model, completed.

Prepared a preliminary feasibility study (market, technical, economic and financial) for the production of CME from Copra or Coconut Oil (CNO) for transport use and/or power generation in theprovinceofSorsogon, Bicol Region, where copra is abundant but afar from coconut oil mills. Project proponent is Harty Philippines, Inc.

 

Energy Efficiency (EE) Market Transformation Concept Paper

June 11-13, 2008 – Concept Paper for the Asian Development Bank (ADB)

Prepared a “Concept Paper” for ADB that enumerates the various ESCO’s needed to promote energy efficiency and its market transformation into aggregate and bankable ESCO entities in the areas of EE Research & Development, Transport R&D and Management, Commercial Building R&D and Management, Industry and Power Generation R&D and Management which will conduct energy audits, provide consultancy services, promote energy efficiency activities and technologies such as cogeneration and tri-generation, aggregate loads for gas, heat and electricity and purchase as aggregator the cheapest source of energy from the WESM and time-of-use tariffs for electricity and gas

 

Oil, Energy and Electricity Pricing Modeling Consultant

June 2-30, 2008  – Developed an Oil and Energy Pricing Model – completed

Prepared an energy pricing model for the Philippine Energy Task Force mandated to study the impact of the rising Dubai Crude Oil Marker to $200/bbl to domestic prices of oil products, imported and local coal, geothermal electricity and steam, natural gas and electricity, keeping in mind the price, tax and royalty structure and its impact on government tax revenues, inflation, exchange rate, budget deficit and economic growth and credit rating, and report its findings and recommendations on how to mitigate and manage rising energy prices to the Philippine Cabinet and President

 

Clean Coal Energy Modeling Consultant

April 2008 – Developed a power plant and project finance model for E-Power – completed

Prepared project finance model for Clean Coal Technology for 4 x 40 mw Power Generation (Atmospheric Circulating Fluidized Bed) for E-Power, a new entrant in the power generation industry in thePhilippines

 

TransCo Power Bill Calculation Model

May 2008 – Prepared latest power bill model for estimating transmission charges

Updated a Power Bill model for calculating power delivery service (PDS) rate, system operator (SO) charge, metering service provider (MSP) charge, adjustments for power factor and interruption, connection charge, residual sub-transmission charge, ancillary services charge, universal charge, and NPC effective rate.  Together with the project finance model of a power plant, the delivered cost of electricity to the customer could be calculated for a number of configuration (embedded generator, load) and varying transmission voltage and reliability (firm, non-firm days).

 

Energy Summit Consultant

January 29-31 and Feb 1-5, 2008 – Energy Summit 2008

Assisted DOE in the planning and conduct of the 2008 Philippine Energy Summit; presented discussion paper on Renewable Energy Market and Financial Barriers; provided expert advice to Workshop Leader during the ADB Workshop on High Oil Prices; provided technical inputs during the substantive review of the Summit and Workshop outputs leading to preparation of the Summit Report to be submitted to the President of the Philippines.

 

Financial Modeling Consultant

Aug-Sep 2007 – Prepared Guam Power Authority (GPA) O&M Financial Bid for Harty USA, Inc. (completed) and Kalayaan Twin Falls Mini-Hydro Power Plant Model (model completed, securing now DOE non-exclusive reconnaissance permit)

Prepared project finance models for evaluating the value of an asset for sale given the current state of the power asset (capacity, heat rate or efficiency); generation potential (given its over-haul and maintenance schedule, outage rate, external factors, availability); transmission line constraints; net power sales to customers; discounts and net revenue; cost of fuel and O&M costs; local and national taxes, permits & licenses; carbon emission reduction credits when applicable; depreciation & amortization; interest cost of debt; corporate income tax; government incentives; weighted average cost of capital (minimum equity return rate or hurdle rate, debt interest rate); equity structure (equity capital, debt capital, donated capital); and balance sheet accounts to be maintained such as level of working capital, receivables and bad debts, payables and inventories.

 

Energy Consultant – Liquid Fuels & Fuel Additives

Octagon Chem Oil Corporation

May 22, 2007 to December 31, 2007 – Completed

This project involves the provision of Combustion & Energy expertise with economic & financial analysis in order to promote the use of an aqua bio-fuel additive developed by a Japanese Inventor that will allow the blending of water with diesel oil and fuel oil (bunker fuel and low sulfur fuel oil).  The addition of bio-fuel additive will reduce emissions of SO2 and CO2 and raise combustion efficiency due to the enhanced atomization of the fuel due to the rapid volume expansion of liquid water into vapor.  The end result is an environmental-friendly and energy-efficient fuel mix that reduces the cost of generating electricity when used in diesel engine generators and cost of steam when used in diesel-fired or bunker-fired steam boilers.  The Consultant prepared the testing procedure and calculation sheets for determining combustion efficiency, generator efficiency, boiler efficiency, flue gas emission in general, emission of SO2 and CO2 per kg of steam or kWh of electricity, and fuel cost per kg of steam or kWh of electricity.  The fuel additives are presently undergoing joint evaluation and review by DOST, DOE and DENR as part of the DOE registration process for fuel additives in thePhilippines.

 

Energy Planning and Project Finance Consultant

Energy & Power Development (consultancy)

June 22, 2007 to December 22, 2007 – Completed, submitted all reports to DOE

This six (6) month consultancy service intends to assist the Philippine Department of Energy (DOE) and the Energy Regulatory Commission (ERC) in evaluating Qualified Third Party (QTP) proposals with respect to proposed technology, reliability and availability, equity and debt structure, capital and operating costs, fuel costs, manpower, maintenance and overhaul schedules and requirements, capacity factor, conversion efficiency, economic life and its resulting electricity tariff.  By looking into other technology alternatives, configuration and capacity, the “Best New Entrant” Full Cost Recovery Rate (FCRR) will be recommended in order to ensure adequate, reliable and affordable energy services to the rural communities in thePhilippines.  As QTP Consultant, a policy note was prepared to augment the regulatory framework of the QTP Program to include the methodology, calculation procedure and data requirements for determining the socially acceptable retail rate (SARR) that the rural community could afford to pay for the reliable and cost-effective electricity service.  The FCRR was likewise determined from a power plant project finance model using NPC-SPUG’s return on rate base (RORB) tariff methodology which was modified by the QTP Consultant to include capital and reasonable profit recovery (tariff = rate base x WACC + generation cost + profit recovery, revenue = tariff x kWh sales) which allows for sustainable rural electrification. This is a World Bank funded project for Philippine Rural Electrification.

 

President and Proprietor

Winning Edge Lending Investor (family-owned company)

December 1, 2006 to present (now a stock corporation registered at SEC)

Provide capital to pensioners and salaried employees for consumer loans and investment purposes.  Also provide investors opportunities to earn regular interest income higher than bank rates.  Develop monthly financial model for lending operation that determines funding requirements and rate of return given number of borrowers, average borrowing, cost of placements, operating costs and lending rates. A daily treasury model was also prepared to monitor bank balances given inflows and outflows of funds.  A general ledger accounting system to monitor monthly and cumulative trial balances, incomes, balance sheet was also prepared.  Presently, my wife and three staff (office secretary, loan processing clerk and credit investigator) are running the company.  I provide financial advice, accounting, financial projections and treasury services.

 

Senior Manager, Technical Services

First Gen Corporation

February 1, 2001 to November 30, 2006

Provide technical services and advice to projects under development, e.g. power generation technology capital and operating cost, efficiency or heat rate, reliability, availability, maintenance schedule, construction schedule, interest during construction, feasibility study and financial model of power plant project or asset to be acquired. Conduct technical and environmental studies on NPC assets (Calaca and Masinloc coal; Pantabangan, Ambuklao/Binga hydro; Makban-Tiwi geothermal; Sucat oil thermal; and Bauang diesel).

 

Resigned to start Winning Edge Lending Investor (now Winning Edge Lending Corporation) and to engage in Energy & Business Development Consultancy (clients – DOE, WB, USAID, Harty, RAPCO, Octagon Chem Oil).  Also marketing the Real Time General Ledger Accounting & Loans Processing System (a generic database accounting package, presently used by a number of Lending, Manpower Deployment, Construction and Trading companies).

 

Proprietor and General Manager

Real-Time Management Systems

General Ledger Accounting System, Linear Programming Systems

1993 to 2001

Develop accounting and optimization systems (Linear Programming), e.g. general ledger, trial balance, income statement, balance sheet, cash flow, uses & sources of funds, actual vs budget, product blending optimization, petroleum product shipment and distribution modeling, and refinery modeling (crude and product imports, component blending, refinery units and steam / electricity generation).

 

Executive Director

Philippine Council for Industry and Energy Research and Development

Department of Science and Technology

September 14, 1999 to January 31, 2001

Develop R&D strategies for the growth and development of industry and energy sectors.

 

EDP Budget and Planning Manager

Petronas Energy Philippines, Inc.

June 1997 to January 1998

Provide budget and corporate planning services and monitor actual performance versus business plan and budget.  Update the financial model of the company’s business plan.

 

At the Philippine National Oil Company (PNOC)

MakatiCity

April 1978 – May 1993:

 

Petron MIS Coordinator, Market Planning and Distribution Department

Petron Marketing Division

November 1990 to May 1993

In-charge of corporate-wide computerization of terminals and offices

 

Head, Computer Systems Group, Engineering Department

Bataan Refining Corporation (BRC, Limay, Bataan)

June 1986 – November 1990

LP Model consultancy and design of computer systems for refinery

 

Section Chief (PNOC Engineer on detail), Transport, Building & Machineries

Bureau of Energy Utilization, Ministry of Energy

April 1978 – June 1986

Provide leadership in the development and monitoring of energy utilization efficiency and energy conservation initiatives.  Conduct energy audits on establishments in the transport, building & machineries section.

 

At the College of Engineering, University of the Philippines

Diliman,Quezon City, 1974 – 1986

 

Senior Lecturer, Energy 211 (Energy Conservation for Transport and Industry)

1986

 

Lecturer, Energy 201 (World Energy Resources, Supply and Utilization)

1984

 

Lecturer, Engineering Science 204 (Advance Numerical Methods)

Numerical solutions to engineering and mathematical problems using digital

Computers, 1979

 

Lecturer, Engineering Science 201 (Advance Analytical Methods)

Analytical solutions to engineering and mathematical problems using

equations and formulas, 1978

 

Lecturer, Engineering Science 26 (FORTRAN IV Programming)

Computer programming using the FORTRAN IV language, 1975

 

Lecturer, Engineering Science 1 (Engineering Drawing), 1974

 

Thermal Stress Engineer (for geothermal steam piping)

Ralph M. Parsons (RMP)

LegaspiVillage,MakatiCity

January 1978 – April 1978

Predicting thermal stresses in piping systems.

 

Assistant Consultant, Engineering and Consultancy Services

Economic Development Foundation, Inc.

Ayala Avenue,MakatiCity

May 1976 – January 1978

Projects: Water Quality Modeling of theLagunaLakeand The Maximum Assimilative Capacity of Philippine Rivers (an LP Model for determining maximum BOD load to meet minimum DO levels) for NEDA

 

Research Associate, Projects and Planning Development Office (PPDO)

Department of Public Works, Transportation and Communications (DPWTC)

Port Area,Manila, January 1976 – May 1976

Project: Water quality modeling and monitoring of thePampangaRiver.

 

Brand Manager, Tide Detergent

Procter & Gamble, Philippine Manufacturing Corporation (PMC)

Tondo,Manila, June 1975 – Dec 1975

To manage the Tide detergent brand, monitor its efficacy versus competition and improve its cost effectiveness (cost per washing).

 

 

MEMBERSHIP IN PROFESSIONAL ORGANIZATION:

 

Member                                   –        Rotary Club, 1996

 

Founding President                 –        UP Chemical Engineering Foundation

 

Member                                    –        Couples for Christ, 1989 to present

 

 

ARTICLES WRITTEN AND PUBLISHED:

 

  1. “The Assimilative Capacity of Some Rivers in the Philippines”, masteral thesis for M.S. Ch. E., University of the Philippines, 1978 (This is a linear programming model of multi-stretch rivers to maximize the biochemical oxygen demand load of rivers without depleting the dissolved oxygen and exceeding the allowable BOD level).

 

  1. “Coal Conversion Study”, Bureau of Energy Utilization, 1978

 

  1. “The Performance and Emission Characteristics of Gasoline and Methanol in a Spark-Ignition Engine”, masteral thesis for M.S. Combustion and Energy,University of Leeds,U.K. 1980.

 

  1. “Fuel Utilization in Automotive Engines”, Bureau of Energy Utilization, 1981.

 

  1. “Conducting an Energy Audit”, Bureau of Energy Utilization, 1981.

 

  1. “Energy Audit and Survey of Selected Sugar Central and Refineries”, Bureau of Energy Utilization, 1980

 

  1. “Comparative Economics of Diesel and Gasoline Cars”, Bureau of Energy Utilization, 1981

 

 

  1. “Heat Recovery for Electrical Systems”, Bureau of Energy Utilization, 1981

 

  1. “Energy Conservation in Lighting Systems”, Bureau of Energy Utilization, 1981

 

  1. “Energy Analysis: Setting Mass and Energy Balances”, Bureau of Energy Utilization, 1981

 

  1. “Optimum Exit Flue Gas Temperature”, Bureau of Energy Utilization, 1981

 

  1. “Energy Conservation in Buildings”, Bureau of Energy Utilization, 1981

 

  1. “Saving Energy through Efficient Combustion Control and Waste Heat Recovery”, Bureau of Energy Utilization, 1982

 

  1. “Optimum Economic Insulation Thickness”, Bureau of Energy Utilization, 1982

 

  1. “Applications of Linear Programming in Energy Management”, Bureau of Energy Utilization, 1984

 

  1. “OTTV Building Standards”, Bureau of Energy Utilization, 1984

 

  1. “Applications of Mathematical Programming in Energy Systems Analysis”, Bureau of Energy Utilization, 1984

 

  1. “Applied Optimization Techniques in Business and Industry”, Bureau of Energy Utilization, 1985

 

  1. “Linear Programming Package for Solving Optimization Problems in Business, Production, Energy and Environmental Management”, Bureau of Energy Utilization, 1986

 

 

PARTICIPATION IN TRAININGS, SEMINARS, WORKSHOPS, CONFERENCES:

 

  1. Industrial Energy Conservation (USAID Project)

UniversityofTennessee, July 1982 – August 1982

 

  1. Building Energy Standards (OTTV Standards for Commercial Buildings)

Singapore, September 1984 – October 1984

 

  1. Building Energy Modeling (BUNYIP Software for modeling the energy performance of buildings)

Melbourne,Australia, April 1985 – June 1985

 

  1. ASEAN Conference on Energy Conservation

Chiangmai,Thailand, October 1985

 

  1. Introductory Course on the Use of CHEMSHARE CAE PROGRAMS

Ms. Beth Jones (Design II Instructor), February 1987

 

  1. The LP2 Course on OMNI Techniques

Mr. Bill Hart (LP Formulation and OMNI Instructor), May 1987

 

  1. Advanced Process Control

Yokogawa,Singapore, 1988 (1 month)

 

  1. Petroleum Refinery Modeling

Boston,Massachusetts,USA, 1989 (2 months)

 

  1. Financial Management:  Considerations, Approaches and Evaluation

University ofAsiaand the Pacific (UA&P)

Manila Galleria Suites,OrtigasCenter, October 6-8, 1999

 

  1. 18th Environmental Education Network of the Philippines National Conference

Riverbend Hotel,RiverbankCenter, October 20-22, 1999

 

  1. 1st National Quality and Production Summit

Heroes Hall, Malacanang, November 24, 1999

 

  1. UNDP-GEF Stakeholders’ Workshop

Department of Energy, January 11, 2000

 

  1. 5th Project Coordination Committee (PCC) Meeting of the ASEAN-AAECP III

Waste Water Treatment Technology Transfer and Cleaner Production Demonstration Project (as Philippine Representative)

Nakorn Pathorn,Thailand, January 25-27, 2000

 

  1. Symposium on Environmental Technology and Know-How

Mandarin Oriental,MakatiCity, March 15, 2000

 

  1. Seminar Workshop on “Employee Counseling and Grievance Handling”

Personnel Officers Association of thePhilippines(POAP)

Venus Park View Hotel,BaguioCity, April 26-28, 2000

 

 

  1. Follow-Up Seminar on Clean Coal Technology Transfer Project

Philippine DOE-EUMB andJapanNEDO, January 16, 2001

 

  1. Project Finance & Modeling Training Course

C. Richard Tinsley, IAF, April 2001.

 

  1. Fuel Quality and Alternative Fuels

USAID,New Delhi,India, May 2-4, 2001

 

  1. Introduction to Occupational Health and Ergonomics

Dr. Albert L. Asprec, MD, The Legend Hotel, Mandaluyong, June 1, 2001

 

  1. Environment, Safety & Health (ESH) Refresher Course

FPHC Boardroom, Benpres Bldg,PasigCity, June 6, 2001

 

  1. Environment, Safety & Health (ESH) Management Workshop

EugenioLopezCenter,AntipoloCity, September 4-7, 2001

 

  1. ESH Internal Audit

EugenioLopezCenter,AntipoloCity, September 14, 2001

 

  1. Fire Safety Seminar

FPHC Boardroom, Benpres Bldg,PasigCity, October 31, 2001

 

  1. 5S and Good Housekeeping

FPHC Boardroom, Benpres Bldg,PasigCity, January 18, 2002

 

  1. Technical Inspection

FPHC Boardroom, Benpres Bldg,PasigCity, April 26, 2002

 

  1. Corporate Wellness

EugenioLopezCenter,AntipoloCity, May 23-25, 2002

 

  1. Emergency Preparedness

FPHC Boardroom, Benpres Bldg,PasigCity, August 16, 2002

 

  1. Basic and Advanced Powerpoint

FPHC Boardroom, Benpres Bldg,PasigCity, August 27, 2002

 

  1. Effective Presentation Skills Seminar

Lead Consulting Network

FPHC Boardroom, Benpres Bldg,PasigCity, October 22-24, 2002

 

  1. Integrated Management System: An Introduction

Neville Clark,Philippines

Via Mare, Tektite Bldg,PasigCity, January 13, 2003

 

  1. Thermoflow Software Suite

Richmonde Hotel,OrtigasCenter,PasigCity, February 3-7, 2003

 

  1. Project Risk and Cost Management

The Knowledge Group of Companies

Mandarin Oriental Hotel,MakatiCity, February 24-25, 2003

 

  1. Integrated Management System: An Awareness Course

FPHC Boardroom, Benpres Bldg,PasigCity, March 10, 2003

 

  1. Quality Management System

Neville Clark,Philippines

Richmonde Hotel,OrtigasCenter,PasigCity, March 18, 2003

 

  1. Auditors / Lead Auditors of ISO 9000:2000 Series Quality Management Systems

Neville Clark,Philippines, July 21-25, 2003

 

  1. Internal Integrated QESH Management System Audit

Neville Clark,Philippines,  September 10-13, 2003

 

  1. Gas Contract Negotiations

Discovery Suites,OrtigasCenter,PasigCity, November 4-5, 2003

 

  1. Industry Workshop on the Clean Development Mechanism (CDM)

ClimateChangeInformationCenterand PBE

Manila Observatory,AteneoUniversity, February 11-12, 2004

 

  1. Environmental Management Accounting for Southeast Asia

Asian Society for Environmental Protection (Thailand)

Heritage Hotel,PasayCity, February 19-20, 2004

 

  1. Orientation Seminar on DENR Administrative Order No. 30 Series of 2003 “Implementing Rules and Regulations (IRR) for the Philippine Environmental Impact Statement (EIS) System”

ECI Systems, Strata 100 Bldg,Emerald Ave,OrtigasCenter,PasigCity

June 22, 2004

 

  1. Demand Side Management and Energy Efficiency

Dusit HotelNikko,MakatiCity, December 8, 2004

 

  1. Problem Solving and Decision Making Program within First Gen

Manila Execon Group, Inc.,LindenSuites, March 2-4, 2005

 

  1. Power Generation

EPIC EducationalProgramInnovationsCenter

LindenSuites, March 15-17, 2005

 

  1. Effective Business and Report Writing

Guthrie Jensen, April 1, 2005

 

  1. Industrial Waste Management in the Power Sector: Pollution Prevention and Current Treatment Technologies

UP-NEC and Pacific Spectrum Environmental Research & Consultancy

LindenSuitesOrtigasCenter,PasigCity, August 5, 12, & 19, 2005

 

  1. Seminar / Conference on Energy Sustainability through Hydropower Systems

Sponsored by DOE, JICA and PASSHYDRO

PNOC Executive Lounge, PNOC Bldg 5,Ft.Bonifacio,TaguigCity

January 26-27, 2006

4 Responses to “CURRICULUM VITAE of MARCIAL T. OCAMPO”

  1. CURRICULUM VITAE of MARCIAL T. OCAMPO | Energy … – Renewable Energy For Future Says:

    […] the rest here: CURRICULUM VITAE of MARCIAL T. OCAMPO | Energy … ← Choosing Renewable Energy Аnd Keeping Your Fuel Spending […]



  2. August Bugash Says:

    Dear Mr. Marcial Ocampo,

    My name is Mr. August A. Bugash a graduate of San Sebastian College C.M. Recto H.S. Batch 1970.

    Currently we are looking for a pre feasibility study or feasibility study for CDM Project using Rice Husk, coconut husk, pig manure, municipal waste etc.. We have a Korean Principal who is interested to go into joint venture for such project in the philippines.Initially they are looking for a 1MW to 2MW capacity of CDM Projects. We were browsing the internet and see your curriculum vitae and thought that we may be able to help each other on this.

    We would highly appreciate should you find time to send us a reply on this matter.

    Very truly yours,

    August A. Bugash
    Managing Director

    Fericson Enterprises
    No 3502 Ph 2 CI, Kasikatan St.
    Karangalan, Pasig City.
    Phone: (632) 646-3954
    Mobile: 0917-408-8118
    email: ferent@mail.com
    aabferent@yahoo.com



  3. Millicent Grossley Says:

    Spot on with this write-up, I really suppose this web site needs way more consideration. I’ll probably be again to read rather more, thanks for that info.



  4. Ciara Says:

    I am truly happy to read this web site posts which includes lots of valuable data, thanks for providing such data.



Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>