Integrated Wind Prospecting, Wind Resource Assessment, Annual Power Generation and Capacity Factor, and Wind Project Finance Model with Monte Carlo Simulation

March 29th, 2016 No Comments   Posted in wind energy and power

Integrated Wind Prospecting, Wind Resource Assessment, Annual Power Generation and Capacity Factor, and Wind Project Finance Model with Monte Carlo Simulation

Yes, your energy technology expert has done it again.

Version 3 has been released that integrates all the steps needed in fully developing your wind energy project.

It combines the data entry of the wind velocity profile of the prospective wind farm site (from wind mast anemometer monitoring or from 3-TIER, NREL wind profile database), interpolation of daily and hourly wind speed (up to 15-minute pulse if needed by the TRANSCO / GRID operator), look-up tables for the various wind turbine generator manufacturers, calculation of annual power generation and capacity factor, overnight capital cost of wind turbine and its fixed and variable O&M costs, and project finance modeling (with option for both deterministic and stochastic modeling using Monte Carlo Simulation). More »

CDM Wind Model2.xls

June 25th, 2012 No Comments   Posted in renewable energy

CDM Wind Model2.xls

In addition to the worksheets found in the ADV models of the regulator, 5 additional tabs or worksheets have been added (Capex, Opex, Revenues, Project IRR and Sensitivity) into the CDM model which is a financial evaluation without taxes (that distort the economic and technical performance) and debt (pure equity investment). For the RE project to benefit from CDM credits, the project IRR should not be more than 15% p.a.

Wind energy is most available in countries within the 40 deg North latitude and 40 deg South latitude. It can be harnessed using giant wind turbines that when connected together in a wind farm can provide utility scale capacities of 2.0 MW per turbine and with 15 turbines, could produce 30 MW of power in a given wind farm. More »

MTO Wind Model.xls

June 24th, 2012 No Comments   Posted in renewable energy

MTO Wind Model.xls

Wind energy is most available in countries within the 40 deg North latitude and 40 deg South latitude. It can be harnessed using giant wind turbines that when connected together in a wind farm can provide utility scale capacities of 2.0 MW per turbine and with 15 turbines, could produce 30 MW of power in a given wind farm.

This MTO first-year tariff for wind makes use of the basic assumptions of the country’s RE regulator for rated capacity (30 MW), capacity factor (25.8%), plant own use (5%), and transmission line loss (3%). More »

ADV Wind Model.xls

June 24th, 2012 No Comments   Posted in renewable energy

ADV Wind Model.xls

Wind energy is most available in countries within the 40 deg North latitude and 40 deg South latitude. It can be harnessed using giant wind turbines that when connected together in a wind farm can provide utility scale capacities of 2.0 MW per turbine and with 15 turbines, could produce 30 MW of power in a given wind farm.

This advanced model for wind makes use of the basic assumptions of the country’s RE regulator for rated capacity (15 x 2 MW), capacity factor (25.8%), plant own use (3%), and 0.20% plant degradation rate. More »

Wind Power Model – avail of 50% discount now

August 5th, 2011 1 Comment   Posted in renewable energy

Wind Power Model- avail of 50% discount now

As promised in my previous blog, I will now deal with the cost of renewable energy technologies (feed-in-tariff). I will be making a special offer for the purchase of the following RE technologies:

1) Biomass Power Model (Direct Combustion, Cogeneration, Gasification of MSW)

2) Mini-Hydro Power Model

3) Ocean Thermal Energy Conversion (OTEC) Model

4) Solar PV Power Model

5) Wind Power Model

6) Renewable Energy Resource Assessment Model (Wind, Solar PV, Mini-Hydro) – Converts wind speed measurement, solar radiation and rainfall data into hourly power output, annual power generation and annual capacity factor) More »